ompact and Reliable Power Protection for:
Servers, IT and network equipment
Office telecommunication and security systems
Medical, diagnostic and test devices
Bank and Finance applications
Chemical and Manufacturing process
Auxiliary and Emergency care systems
• True double-conversion online UPS
• Wide input voltage range (110-300 VAC)
• Input power factor correction 0.99
• Output power factor 0.9
• 50Hz/60Hz frequency converter mode
• Programmable power management outlets
• Emergency power off function (EPO)
• ECO mode operation for energy saving (ECO)
• SNMP+USB+RS-232 multiple communications
• Smart battery charger design for optimized battery performance
• Selectable output voltage via LCD panel
You must be logged in to post a review.
Availability: In stockOut of stock
Battery Type 12 V / 9 AH X 4
Typical recharge time 4 hours to recover to 90% capacity
Half Load- 800 W Runtime (min) 12
Full Load – 1600 W Runtime (min) 4
Output
Output power capacity: 1600 Watts / 2000 VA
Max Configurable Power (Watts): 1600 Watts / 2000 VA
Nominal Output Voltage: 230V
Output Voltage Distortion: 3%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other …
Battery Type 12 V / 9 AH X 4
Typical recharge time 4 hours to recover to 90% capacity
Half Load- 800 W Runtime (min) 12
Full Load – 1600 W Runtime (min) 4
Output
Output power capacity: 1600 Watts / 2000 VA
Max Configurable Power (Watts): 1600 Watts / 2000 VA
Nominal Output Voltage: 230V
Output Voltage Distortion: 3%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other …
Availability: In stockOut of stock
ST-UK33 the new transformer-less UPS from SATRON Power Solutions. Best in class system for its compact footprint, the system also provides high efficiency up to 97% .
ST-UK33 the new transformer-less UPS from SATRON Power Solutions. Best in class system for its compact footprint, the system also provides high efficiency up to 97% .
Availability: In stockOut of stock
Basic Surge Protector components such as MOVs and Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC Surge Protector products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Basic Surge Protector components such as MOVs and Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC Surge Protector products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Availability: In stockOut of stock
Protect Plus S300 is best in class system for its compact footprint, the system also provides high efficiency (> 95.6 % in double conversion and up to 98 % in Eco Mode).
Protect Plus S300 is flexible in its configurations and the benefits of a wide range of options make it an ideal power protection for small and medium sized critical applications where power consumption, available space and reliability are key parameters. The combination of high-level performance, with integrated battery solutions, or (as an alternative), the inbuilt galvanic isolation, the compact footprint and the wide range of options, make Protectplus S300 the best solution for the power quality of any critical load.
The UPS is based on a highly efficient transformer-less double conversion technology, ensuring the lowest OPEX on the market in its category. Best in class for energy consumption; the system has a very low Total Cost of Ownership (TCO).
Main Key Features:
Compact foot-print, with integrated batteries or isolation transformer up to 80 kVA
3-level IGBT technology
Transformer-less architecture
AC/AC efficiency up to 95.6 % (VFI) and 98 % in VFD
Input PF > 0.99 and THDi < 3 %
Output PF up to unity (without derating)
Up to 8 units in parallel connection
Static and maintenance bypass switches included
Back-feed protection included
Cold start (battery start) function
4.3″ touch screen display
Wide range of options
Main benefits:
Easy installation, operation and maintenance: all models have front access, for easy maintenance or inspection.
Maximized savings in terms of footprint (m2), power installed (kVA), electrical system (cabling and protection devices), security (MTTR and MTBF) and power management (kW and cost).
Easy upgradeable architecture with reduced CAPEX and optimized OPEX. Protectplus S300 offers a low input THDi and almost unity input PF, even when a low percentage of load is applied: no additional power-consuming filter.
Wide range of options such as a load synchronization tool, top cable entry, up to IP41 protection degree, battery temperature probes as well as all connectivity devices (SNMP, Modbus, RS232).
4.3″ touch screen display: all the main parameters of the UPS are always under control.
Protect Plus S300 is best in class system for its compact footprint, the system also provides high efficiency (> 95.6 % in double conversion and up to 98 % in Eco Mode).
Protect Plus S300 is flexible in its configurations and the benefits of a wide range of options make it an ideal power protection for small and medium sized critical applications where power consumption, available space and reliability are key parameters. The combination of high-level performance, with integrated battery solutions, or (as an alternative), the inbuilt galvanic isolation, the compact footprint and the wide range of options, make Protectplus S300 the best solution for the power quality of any critical load.
The UPS is based on a highly efficient transformer-less double conversion technology, ensuring the lowest OPEX on the market in its category. Best in class for energy consumption; the system has a very low Total Cost of Ownership (TCO).
Main Key Features:
Compact foot-print, with integrated batteries or isolation transformer up to 80 kVA
3-level IGBT technology
Transformer-less architecture
AC/AC efficiency up to 95.6 % (VFI) and 98 % in VFD
Input PF > 0.99 and THDi < 3 %
Output PF up to unity (without derating)
Up to 8 units in parallel connection
Static and maintenance bypass switches included
Back-feed protection included
Cold start (battery start) function
4.3″ touch screen display
Wide range of options
Main benefits:
Easy installation, operation and maintenance: all models have front access, for easy maintenance or inspection.
Maximized savings in terms of footprint (m2), power installed (kVA), electrical system (cabling and protection devices), security (MTTR and MTBF) and power management (kW and cost).
Easy upgradeable architecture with reduced CAPEX and optimized OPEX. Protectplus S300 offers a low input THDi and almost unity input PF, even when a low percentage of load is applied: no additional power-consuming filter.
Wide range of options such as a load synchronization tool, top cable entry, up to IP41 protection degree, battery temperature probes as well as all connectivity devices (SNMP, Modbus, RS232).
4.3″ touch screen display: all the main parameters of the UPS are always under control.
Availability: In stockOut of stock
Compact and Reliable Power Protection for:
– Servers, IT and network equipment
– Office telecommunication and security systems
– Medical, diagnostic and test devices – Bank and Finance applications
– Chemical and Manufacturing process
– Auxiliary and Emergency care systems
Compact and Reliable Power Protection for:
– Servers, IT and network equipment
– Office telecommunication and security systems
– Medical, diagnostic and test devices – Bank and Finance applications
– Chemical and Manufacturing process
– Auxiliary and Emergency care systems
Availability: In stockOut of stock
Input voltage: 230 V AC
Output voltage: 230 V AC
Transfer time: 6 ms
Network frequency: 45-65 Hz
Power range: 800 VA, 450 W
Battery type: Lead-acid battery
Number of batteries: 1
Charging time: 8 h
Battery voltage: 12 V
Battery life: 5 year(s)
Net weight: 5.3 kg
Input voltage: 230 V AC
Output voltage: 230 V AC
Transfer time: 6 ms
Network frequency: 45-65 Hz
Power range: 800 VA, 450 W
Battery type: Lead-acid battery
Number of batteries: 1
Charging time: 8 h
Battery voltage: 12 V
Battery life: 5 year(s)
Net weight: 5.3 kg
Availability: In stockOut of stock
Real VFI / double conversion online technology suitable for safe supply application-critical consumers in the IT environment such as workstations, servers, storage systems, as well as in the area of sensitive switching and control systems. The multilingual graphical LCD display provides all the important operating states and values that can be stored and retrieved in addition to real-time data storage in plain text.
Real VFI / double conversion online technology suitable for safe supply application-critical consumers in the IT environment such as workstations, servers, storage systems, as well as in the area of sensitive switching and control systems. The multilingual graphical LCD display provides all the important operating states and values that can be stored and retrieved in addition to real-time data storage in plain text.
Availability: In stockOut of stock
Static uninterruptible power supplies for IT
Zero impact source
High efficiency
Compensation of the charging voltage according to the temperature
Battery testing
Protection against deep discharges
Current ripple
Wide voltage range
Static uninterruptible power supplies for IT
Zero impact source
High efficiency
Compensation of the charging voltage according to the temperature
Battery testing
Protection against deep discharges
Current ripple
Wide voltage range
Availability: In stockOut of stock
Configurable power max: 1.4 kWatts / 2.0 kVA
Output frequency: 50/60 Hz +/- 1 Hz
Transfer time: 2 ms
Input frequency: 45/65 Hz
Input voltage range for main connection: 157 – 303V
Battery Type: Maintenance-free, waterproof and sealed lead-acid battery with suspended electrolyte
Recharge time: 4 hours
Battery Capacity: 302 volt ampere per hour
Height: 240 mm, 24.0 cm
…
Configurable power max: 1.4 kWatts / 2.0 kVA
Output frequency: 50/60 Hz +/- 1 Hz
Transfer time: 2 ms
Input frequency: 45/65 Hz
Input voltage range for main connection: 157 – 303V
Battery Type: Maintenance-free, waterproof and sealed lead-acid battery with suspended electrolyte
Recharge time: 4 hours
Battery Capacity: 302 volt ampere per hour
Height: 240 mm, 24.0 cm
…
ompact and Reliable Power Protection for:
Servers, IT and network equipment
Office telecommunication and security systems
Medical, diagnostic and test devices
Bank and Finance applications
Chemical and Manufacturing process
Auxiliary and Emergency care systems
Reviews
There are no reviews yet.